Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point

Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point
Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point
Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point
Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point
Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point
Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point
Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point
Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point
Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point
Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point
Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point

Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point

Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel - Solder Point. Carton of 30 - Uni-Solar PVL-136 136W 24-Volt Flexible Amorphous Solar Panel with Bottom Facing SOLDER POINTS. These are top tier finished panels. Unisolar made them this way for a specific client.

These are also Grid Tie UL 1703 Listed for Systems up to 600 VDC. Which means they were made to last 20 Years. Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. They are also Category 3 (130 MPH) Hurricane uplift resistant and installed with no hardware. Each cell is connected to each other via bypass diodes.

Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost - usually less than 4.5%. These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. The following are basic specs for individual solar panels. Maximum Power (Pmax): 136 Watts.

Nominal Operating Voltage: 24 Volts. Max Power Voltage (Vmpp): 33 Volts. Max Power Current (Impp): 4.1 Amps. Open Circuit Voltage (Voc): 46.2 Volts. Short Circuit Current (Isc): 5.1 Amps.

Max System Voltage: 600 Volts. Bypass Diodes at each cell connection. Category 3 (130 MPH) Hurricane uplift resistant when installed in accordance with guidelines. Shadow & High Heat Tolerant. Connectors: None: Solder Points on bottom of panel. Bonding adhesive factory-installed on the back of the laminate. Panel Dimensions:216" (18 Feet) x 15 3/8". Here is a video with many examples. UNISOLAR PVL-136 Solar Power Amorphous Flexible PV Panels - YouTube. Video will open in a new window. These brand new made in USA solar panels are packed and stored in the factory carton of 30 panels. The Unisolar manufacturing and distribution facility was liquidated in 2012 and these panels came direct from Unisolar. We do have various brochures and installation guides produced by Unisolar available we can offer you if requested. Uni-solar peel and stick flexible panels are no longer made and are getting more rare by the day. &#######xA0; Please be sure to include a street address (not a PO Box) for any method other that US Postal Service. &#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. &#######xA0;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B;&#####x200B. Our customers are our highest priority. Media, Books, and Software are non-refundable. The item "Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point" is in sale since Friday, August 6, 2021. This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits".com" and is located in Ventura, California. This item can be shipped worldwide.
Uni-Solar PVL-136 4,080 W Carton of 30 136W Flexible Solar Panel Solder Point