200W kit (2Pcs 100w solar panel kits). 1 set 2 in 1 PV connector in parallel solar panel. 300W kit (3Pcs 100w solar panel kits).
1 set 3 in 1 PV connector in parallel solar panel. 400W kit (4Pcs 100w solar panel kits). 1 set 4 in 1 PV connector in parallel solar panel. Select high-efficiency 158158mm lines monocrystalline silicon solar cells, the power generation efficiency is about 1.3 times that of conventional polysilicon, and the overall area is smaller at the same power.
Semi flexible design, Graceful appearance, delicate and cabinet. The surface is made of PET and treated with a special process, which is more wear-resistant and improves the absorption efficiency of sunlight. Convenience to take , fashionable elegance. PV connector can be suitable to connect controller. The junction box adopts IP67 waterproof design, contains bypass diode, and the circuit adopts overcharge and reverse current protection design.
Use photovoltaic special cable and PV connector, outdoor use is safe, waterproof, high temperature resistance and weather resistance. PV connector is easy to use, plug and play. This product is a solar module.
It is recommended to be used with controllers and batteries. It can be used in various scenarios such as households, camping, RVs, yachts, street lights and solar power stations.
Performance Under Standard Test Conditions(STC). Minor reduction in efficiency under partial load conditions at 25degC: at 100 W/m2, 95%- (+/-3%) of the STC efficiency (1000 W/m2) is achieved. Maximum system voltage SC II. Maximum system voltage USA NEC.
A Before connecting the solar panel, please connect the controller to the battery first. Connecting the solar panel without connecting the battery may cause the controller to burn out and fail to display. B After the controller is connected to the storage battery, connect the above-mentioned series or parallel solar panels to the controller through the transfer cable. C Finally, connect the required DC load to the load end of the controller. If the load does not work, press the third button of the controller.D According to the controller manual, adjust the parameters you need. 1set 3M cable with alligator clip(Connect the battery). The inverter has four specifications to choose from. 12V to 110V 1000W inverter. 12V to 220V 1000W inverter.
24V to 110V 1000W inverter. 24V to 220V 1000W inverter. This product must not come into contact with highly corrosive substances.
It is strictly forbidden to modify, disassemble, drop, and hit the junction box and products by yourself, avoid stepping on the surface and scratching the surface with hard objects during use. A large number of scratches or dirt on the surface of the solar panel may cause the solar cell module to be inefficient, and in severe cases may cause burnout. The suitable ambient temperature range of this product: -20 °C-80 °C, please do not exceed this range. The solar panel must be installed in an area with good sunlight and no shadow.
The long-term work of the solar cell module in the sun with shadow may have the risk of burning. It is forbidden to connect the positive and negative poles of the product together, and it is forbidden to put the product into water or fire, otherwise it will damage the product. The overall power of the photovoltaic module must be less than the rated power of the controller (rated voltage × rated current). It is strictly prohibited to overload the controller. The total voltage of the photovoltaic module connected to the controller must be within the photovoltaic input voltage range of the controller.
The inverter can only be connected to the battery, not directly to the controller. The item "400w 300w Flexible Solar Panel High Efficiency For Boat Car Home 12V/24V Control" is in sale since Saturday, February 20, 2021.
This item is in the category "Home & Garden\Home Improvement\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Panels & Kits". The seller is "topshopping-18" and is located in China. This item can be shipped worldwide.